Changes to Step #13
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Extruder cover assembly |
|---|---|
| + | [* 2] Insert one M3 square nut |
| + | [* 5] Insert one M3 hex nut |
| + | [* 4] Insert one M3 hex nut |
| + | [* 6] Insert two M3x40 screw to lock the hotend in place |
| + | [* 9] Check that the hotend as not rotated, ajust if necessary. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added