Changes to Step #19
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Print fan shroud assembly |
|---|---|
| + | [* 10] There is currently no official print fan shroud for the Bear extruder. I recommend you the [https://github.com/prusa3d/Original-Prusa-i3/blob/MK3/Printed-Parts/stl/nozzle-fan.stl|original R1 shroud] from Prusa. A good alternative is the shroud from [https://www.thingiverse.com/thing:3249344|RH_Dreambox] or [https://www.thingiverse.com/thing:3320490|Robps]. |
| + | [* 5] Insert the print shroud. If needed un-tight the two print fan screws |
| + | [* 1] Use an M3x10 screw to attach the shroud |
Image 1
No previous image
Added