Changes to Step #19

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Print fan shroud assembly
[* 10] There is currently no official print fan shroud for the Bear extruder. I recommend you the [https://github.com/prusa3d/Original-Prusa-i3/blob/MK3/Printed-Parts/stl/nozzle-fan.stl|original R1 shroud] from Prusa. A good alternative is the shroud from [https://www.thingiverse.com/thing:3249344|RH_Dreambox] or [https://www.thingiverse.com/thing:3320490|Robps].
-[* 5] Insert the print shroud. If needed un-tight the two print fan screws
-[* 1] Use an M3x10 screw to attach the shroud
+[* 2] Insert the print shroud. If needed un-tight the two print fan screws
+[* 5] Use an M3x10 screw to attach the shroud