Changes to Step #19

Edit by Matthew Harrison —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Print fan shroud assembly
-[* 10] There is currently no official print fan shroud for the Bear extruder. I recommend you the [https://github.com/prusa3d/Original-Prusa-i3/blob/MK3/Printed-Parts/stl/nozzle-fan.stl|original R1 shroud] from Prusa. A good alternative is the shroud from [https://www.thingiverse.com/thing:3390107|RH_Dreambox] or [https://www.thingiverse.com/thing:3320490|Robps].
+[* 10] There is currently no official print fan shroud for the Bear extruder. I recommend the [https://github.com/prusa3d/Original-Prusa-i3/blob/MK3/Printed-Parts/stl/nozzle-fan.stl|original R1 shroud] from Prusa. Some other good alternatives are the shroud from [https://www.thingiverse.com/thing:3390107|RH_Dreambox] or [https://www.thingiverse.com/thing:3320490|Robps].
[* 2] Insert the print shroud. If necessary, slightly unscrew the print fan.
[* 5] Use an M3x10 screw to attach the shroud