Changes to Step #2
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Mandatory tools |
|---|---|
| + | [* 10] This step and the next one list the mandatory tools you need to build the Bear frame. |
| + | [* 2] Small pliers with cutting capabilities |
| + | [* 3] Hex key 1.5mm for MK2(S) and MK2.5(S) only, not useful for MK3(S). |
| + | [* 4] Hex key 2mm. |
| + | [* 5] Hex key 2.5mm. Ball end would be very useful. |
| + | [* 6] Hex key 3mm. |
| + | [* 7] Spanner 5.5mm |
| + | [* 8] Slotted screwdriver #1 |
Image 1
No previous image
Added