Changes to Step #3
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Mandatory tools |
|---|---|
| + | [* 2] Having a good square is critical to build the Bear perfectly. I recommend a 200mm long machinist precision square with standard DIN 875 (any grade). |
| + | [* 10] If you want to use a lower quality square you can test (and fix it) as explained in those videos: |
| + | [* 1] https://youtu.be/FNpAQHrNpNU |
| + | [* 1] https://youtu.be/enEYzTXg2Jg |
| + | [* 5] Caliper, 150mm long minimum |
| + | [* 7] Steel rule, 200mm long minimum |
Image 1
No previous image
Added