Changes to Step #4
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Optional tools |
|---|---|
| + | [* 2] A long caliper of 200mm or more helps to align the Y axis smooth rods spacing on "Prusa type" printers. |
| + | [* 5] A general purpose clamp will facilitate the squaring of the frame with a machinist square. |
| + | [* 3] Tweezers are always useful :) |
| + | [* 8] You can add a dab of Blue Loctite #243 to your screw to prevent them from unscrewing. |
| + | [* 7] 8mm drill bit or 8mm reamer can be useful in case the smooth rods holes on Z axis are a bit too tight. |
Image 1
No previous image
Added