Changes to Step #4
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Optional tools | |
| - | [* 2] A long caliper of 200mm or more helps to align the Y axis smooth rods spacing on "Prusa type" printers. |
| + | [* 2] A long caliper of 200mm or more helps to align the Y axis smooth rods spacing on any "Prusa type" printers. |
| [* 5] A general purpose clamp will facilitate the squaring of the frame with a machinist square. | |
| [* 3] Tweezers are always useful :) | |
| [* 8] You can add a dab of Blue Loctite #243 to your screw to prevent them from unscrewing. | |
| [* 7] 8mm drill bit or 8mm reamer can be useful in case the smooth rods holes on Z axis are a bit too tight. |