Changes to Step #4
Edit by Dave Ogles —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Optional tools | |
| [* 10] This step and the next one list the ***optional*** tools that can be helpful during assembly. You can build the Bear frame perfectly without them. | |
| - | [* 11] Sorry for this extra list |
| - | [* 2] A long caliper of 200mm or more helps to align the Y axis smooth rods spacing on any "Prusa type" |
| - | [* 3] A general purpose clamp will facilitate the squaring of the frame |
| + | [* 11] Sorry for this extra list, we love tools... |
| + | [* 2] A long caliper of 200mm or more helps to align the Y axis smooth rods spacing on any "Prusa type" printer. |
| + | [* 3] A general purpose clamp will facilitate the squaring of the frame when using a machinist square. |
| [* 4] Tweezers are always useful :) | |
| [* 5] You can add a dab of blue Loctite #243 to the screws during assembly to prevent them from unscrewing. | |
| - | [* 7] 8mm drill bit or 8mm reamer can be useful in case the smooth rods holes on Z axis are a bit too tight. |
| + | [* 7] An 8mm drill bit or 8mm reamer can be useful in case the smooth rods holes on Z axis are a bit too tight. |