Changes to Step #5
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Optional tools |
|---|---|
| + | [* 10] This step and the previous one list the ***optional*** tools that can be helpful during assembly. You can build the Bear frame perfectly without them. |
| + | [* 1] Files and deburring tool can be helpful to clean the printed parts. |
| + | [* 1] It is good practice to clean and grease the bearings during the assembly. |
| + | [* 1] We recommend to use lithium based lubricant that has a viscosity between 50 and 100mm2/s at 40 °C, NLGI class 2 and a thermal resistance of 100°C or more. |
Image 1
No previous image
Added