Changes to Step #3
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Back and front extrusions |
|---|---|
| + | [* 8] Take one of two longest extrusions. It is 370mm long. |
| + | [* 5] Slide two t-nuts on each side. |
| + | [* 7] Bolt two plates on the t-nuts using 4 M5x10mm screws. Do not tighten them fully yet. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added