Changes to Step #3

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Back and front extrusions
[* 8] Take one of two longest extrusions. It is 370mm long.
[* 5] On the 20mm face of the extrusion, slide 2x t-nuts on each side (4x t-nuts in total).
-[* 7] Bolt 2x joining plates on the t-nuts using 4 M5x10mm screws. Do not tighten them fully yet.
+[* 7] Bolt 2x joining plates on the t-nuts using 4x M5x10mm screws. Do not tighten them fully yet.