Changes to Step #6

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Back and front extrusions
[* 8] Take the longest extrusions. It is 370mm long.
[* 3] Repeat Step 2 and 3 on this extrusion. You should now have two identical construction.
[* 6] Double check that all your plates are correctly flushed with the extrusion as it could affect the rest of the assembly.
-[* 9] Verify that both extrusion are 370mm long.
+[* 9] Verify that both extrusions are 370mm long.