Changes to Step #6

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Back and front extrusions
+[* 9] Take your time with this step.
[* 8] Take the longest extrusions. It is 370mm long.
[* 3] Repeat Step 3 and 4 on this extrusion. You should now have two identical assemblies.
-[* 6] Double check that all your plates are correctly flushed with the extrusion as it could affect the rest of the assembly.
+[* 6] Double check that all your plates are correctly flushed with the extrusion.
+ [* 9] This is important as it could affect the rest of the assembly.
[* 9] Verify that both extrusions are 370mm long.