Changes to Step #6
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Back and front extrusions | |
| [* 9] Take your time with this step. | |
| [* 8] Take the longest extrusions. It is 370mm long. | |
| [* 3] Repeat Step 3 and 4 on this extrusion. You should now have two identical assemblies. | |
| [* 6] Double check that all your plates are correctly flushed with the extrusion. | |
| [* 9] This is important as other steps will depends on this assembly. | |
| - | [* 9] Verify that both extrusions are 370mm long. |