Changes to Step #6

Edit by Dave Ogles —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Back and front extrusions
[* 9] Take your time with this step.
-[* 8] Take the longest extrusions. It is 370mm long.
-[* 3] Repeat Step 3 and 4 on this extrusion. You should now have two identical assemblies.
-[* 6] Double check that all your plates are correctly flushed with the extrusion.
- [* 9] This is important as other steps will depends on this assembly.
+[* 8] Take the other 370mm long extrusion.
+[* 3] Repeat Steps 3 and 4 on this extrusion. You should now have two identical assemblies.
+[* 6] Double check that all joining plates are flush with the face and end of each extrusion.
+ [* 9] This is an important step as other steps will rely on the accuracy of this assembly.