Changes to Step #6
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Back and front extrusions | |
| [* 9] Take your time with this step. | |
| - | [* 8] Take the other 370mm long extrusion. |
| + | [* 8] Take the other 370mm long extrusion (longest one remaining). |
| [* 3] Repeat Steps 3 and 4 on this extrusion. You should now have two identical assemblies. | |
| [* 6] Double check that all joining plates are flush with the face and end of each extrusion. | |
| [* 9] This is an important step as other steps will rely on the accuracy of this assembly. |