Changes to Step #6

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Back and front extrusions
[* 9] Take your time with this step.
[* 8] Take the other 370mm long extrusion (longest one remaining).
-[* 3] Repeat Steps 3 and 4 on this extrusion. You should now have two identical assemblies.
+[* 3] Repeat Steps 3, 4 and 5 on this extrusion. You should now have two identical assemblies.
[* 6] Double check that all joining plates are flush with the face and end of each extrusion.
[* 9] This is an important step as other steps will rely on the accuracy of this assembly.