Changes to Step #7
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Left and right Y axis extrusions | |
| [* 5] Take one the two middle length extrusions on the pile of not used yet. It is 331mm long. | |
| - | [* 1] Prepare the following parts |
| + | [* 1] Prepare the following parts: |
| [* 4] One of the previous extrusion and plate assembly | |
| [* 2] Two t-nuts. Slide them in the 331mm extrusion as shown on the picture. | |
| [* 7] Two M5x10 screws |