Changes to Step #7

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Left and right Y axis extrusions
[* 5] Take one the two middle length extrusions on the pile of not used yet. It is 331mm long.
[* 1] Prepare the following parts:
- [* 4] One of the previous extrusion and plate assembly
- [* 2] Two t-nuts. Slide them in the 331mm extrusion as shown on the picture.
- [* 7] Two M5x10 screws
+ [* 4] 1x previous extrusion and plate assembly
+ [* 2] 2x t-nuts. Slide them in the 331mm extrusion as shown on the picture.
+ [* 7] 2x M5x10 screws