Changes to Step #7
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| - | [title] |
|---|---|
| + | [title] Reference corner assembly |
| [* 5] Take one the two middle length extrusions on the pile of not used yet. It is 331mm long. | |
| [* 1] Prepare the following parts: | |
| [* 4] 1x previous extrusion and plate assembly | |
| [* 6] 2x t-nuts. Slide them in the 331mm extrusion as shown on the picture. | |
| [* 2] 2x M5x10 screws | |
| [* 7] Assemble the corner with the M5 screws. Do not tighten fully yet, it will need some adjustment first. |