Changes to Step #9
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Left and right Y axis extrusions | |
| [* 1] Prepare the following parts: | |
| [* 2] One t-nut. | |
| [* 4] One M5x12 screw | |
| [* 5] One 3D printed feet (''foot.stl'') | |
| [* 7] Slide the t-nut from the right side. | |
| [* 8] Attach the feet with the M5x12 screw. Tighten strongly. | |
| - | [* 1] Give a final tightening on the |