Changes to Step #9

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Left and right Y axis extrusions
[* 1] Prepare the following parts:
[* 2] One t-nut.
[* 6] One M5x12 screw
- [* 5] One 3D printed feet (''foot.stl'')
+ [* 5] One 3D printed foot (''foot.stl'')
[* 7] Slide the t-nut from the right side.
-[* 8] Attach the feet with the M5x12 screw. Tighten strongly.
+[* 8] Attach the foot with the M5x12 screw. Tighten strongly.