Changes to Step #12
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| - | [* 3] 290mm |
|---|---|
| - | [* 6] Apply pressure |
| + | [* 9] Take your time with this step. Don't hesitate to ask the help of someone else if you feel the need of having a third hand (don't use one of your feet). |
| + | [* 3] Take one the smallest extrusions on the pile of not used yet. It is 290mm long. It will be used for reference. |
| + | [* 7] Place the assembly at the end of a table |
| + | [* 5] Carefully insert the 290mm extrusion in between as shown in the 2nd image. |
| [* 2] Tighten a bit more but not strong strong |