Changes to Step #12

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

-[* 9] Take your time with this step. Don't hesitate to ask the help of someone else if you feel the need of having a third hand (please don't try to use one of your foot).
+[* 9] Take your time with this step.
[* 3] Take one the smallest extrusions on the pile of not used yet. It is 290mm long. It will be used for reference.
[* 7] Place the assembly at the end of a table
[* 5] Carefully insert the 290mm extrusion in between as shown in the 2nd image.
[* 2] Apply pressure in the directions shown and tighten the two M5x10 screws. To not overtighten them for now, only firmly secure the extrusion. movement of the extrusion.
+[* 1] You can now remove the 290mm extrusion carefully and reserve it for later.