Changes to Step #14
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| - | [* 7] Prepare and test 12 t-nuts |
|---|---|
| - | [* 2] Inserts t-nuts on each side as seen on the 2nd and 3rd picture |
| + | [title] Install t-nuts for Z axis |
| + | [* 7] Prepare 12x t-nuts and test them individually with an M5 screw. This is a little tip to avoid having to redo all the hard work of squaring the frame if a t-nut is defective. You can thanks [https://www.youtube.com/channel/UC2Tc0TsvFxC83zF1w5x1PWQ|3DMN for this handy tip :)] |
| + | [* 2] Inserts 3x t-nuts on each side (12x in total) as seen on the 2nd and 3rd picture. |