Changes to Step #14

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] T-nuts installation for Z axis
-[* 7] Take 12 of the previously tested t-nuts. They will be inserted on both 20mm sides of the vslots.
+[* 7] Take 12 of the previously tested t-nuts. They will be inserted on both 20mm sides of the extrusions.
[* 2] Inserts 3x t-nuts on each side (12x in total) as seen on the 2nd and 3rd picture.