Changes to Step #16
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 7] Take 4x t-nuts and slide them as seen on the 1st picture. |
|---|---|
| + | [* 2] With 4x M5x10, assemble the second 370mm extrusion + plate assembly you have prepared in the beginning of this chapter. |
| + | [* 2] Do not tighten them fully yet! |
Image 1
No previous image
Added
Image 2
No previous image
Added