Changes to Step #16
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] XY base assembly | |
| [* 7] Flip the assembly. Be careful to not loose any t-nuts! | |
| [* 5] Take 4x t-nuts and slide them as seen on the 1st picture. | |
| [* 2] Take the second 370mm extrusion + plate assembly you have build in step 5. Assemble it with 4x M5x10 screws. Do not tighten them fully yet! | |
| [* 6] Verify you still have the 12x t-nuts inserted on the sides of the extrusions. | |
| + | [* 10] Your assembly is now looking as the XY base of your future frame :) |