Changes to Step #16
Edit by Dave Ogles —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] XY base assembly | |
| - | [* 7] Flip the assembly. Be careful to not loose any t-nuts! |
| - | [* 5] Take 4x t-nuts and slide them as seen on the 1st picture. |
| - | [* 2] Take the second 370mm extrusion + plate assembly you have build in step 5. Assemble it with 4x M5x10 screws. Do not tighten them fully yet! |
| - | [* 6] Verify you still have the 12x t-nuts inserted on the sides of the extrusions. |
| - | [* 10] Your assembly is now looking as the XY base of your future frame :) |
| + | [* 7] Flip the assembly. Being careful that the placed t-nuts do no fall out. |
| + | [* 5] Take 4x t-nuts and insert them as shown in the 1st picture. |
| + | [* 2] Take the second 370mm extrusion + plate assembly which you built in step 5. Attach it with 4x M5x10 screws. Do not tighten them fully yet! |
| + | [* 6] Verify that all 12 t-nuts remain in the sides of the 331mm extrusions. |