Changes to Step #17
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] XY base squaring | |
| - | [* 9] Take your time with this step. Ask the help of someone else if you feel the need of having a third hand (please don't use one of your foot). |
| - | [* 7] Move the assembly in vertical position with the 3D printed foot on the bottom left. |
| + | [* 9] Take your time with this step. Ask the help of someone else if you feel the need of having a third hand (please don't use one of your foot :) ). |
| + | [* 7] Move the XY base in vertical position with the 3D printed foot on the bottom left. |
| + | [* 9] Be careful to not let fall down the XY base |
| [* 2] Make sure you are on a flat and plane surface. | |
| [* 5] Apply pressure in the directions shown and tighten strongly the 2x M5x10 screws. |