Changes to Step #10
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| - | [title] |
|---|---|
| + | [title] Reference corner assembly |
| [* 7] The corner with the foot is now considered as a reference. In case of doubt during the next steps, you know that this corner is perfectly square and you don't have to touch it anymore. | |
| [* 10] You can double check that the five M5 screws are all strongly tightened. Do not exceed 4.5Nm. |