Changes to Step #10

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Reference foot
[* 7] The corner with the foot is now considered as a reference. In case of doubt during the next steps, you know that this corner is perfectly square and you don't have to touch it anymore.
-[* 10] You can double check that the five M5 screws are all strongly tightened. Do not exceed 4.5Nm.
+[* 10] You can double check that the five M5 screws are all strongly tightened.