Changes to Step #19
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 4] Verify that all the 6 latest M5x10 screws bolted are fully tightened (max 4.5Nm). |
|---|---|
| + | [* 1] Prepare the following parts: |
| + | [* 2] 3x 3D printed feet (''foot.stl'') |
| + | [* 6] 3x M5x12 screws |
| + | [* 5] 3x t-nuts |
| + | [* 7] Assemble the 3 feet using the M5x12 screws and t-nuts. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added