Changes to Step #19

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Feet assembly
-[* 4] Checkk that all 6, of the recently added, M5x10 screws are fully tightened.
+[* 4] Check that all 6, of the recently added, M5x10 screws are fully tightened.
[* 1] Prepare the following parts:
[* 2] 3x 3D printed feet (''foot.stl'')
[* 6] 3x M5x12 screws
[* 5] 3x t-nuts
[* 7] Attach the 3 feet using the M5x12 screws and t-nuts.