Changes to Step #13

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

-[title] Verify t-nuts for Z axis and angled corners
+[title] T-nuts verification
[* 1] Take 16x t-nuts and test them individually with an M5 screw.
[* 10] Those 16 t-nuts will require to disassemble the base of the frame in case one is defective. It is then better to verify them first. You can thanks [https://www.youtube.com/channel/UC2Tc0TsvFxC83zF1w5x1PWQ|3DMN for this handy tip :)]