Changes to Step #13

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

-[title] T-nuts verification
+[title] T-nuts and extrusions verifications
[* 5] Take 16x t-nuts and test them individually with an M5 screw.
[* 10] Those 16 t-nuts will require to disassemble the base of the frame in case one is defective. It is then better to verify them first. You can thanks [https://www.youtube.com/channel/UC2Tc0TsvFxC83zF1w5x1PWQ|3DMN for this handy tip :)]
[* 1] Double check you have used the correct extrusion lengths:
[* 7] 370mm
[* 3] 331mm