Changes to Step #20
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Angle corners assembly |
|---|---|
| [* 1] Flip the assembly (yes again!). | |
| [* 1] Prepare the following parts: | |
| [* 7] 4x angle corners | |
| [* 2] 4x t-nuts | |
| [* 5] 8x M5x8mm screws | |
| [* 4] Remove the tape of the 4 t-nuts and place them as shown on the image. | |
| [* 6] Insert t-nuts on the vertical extrusions as shown on 2nd and 3rd image. |