Changes to Step #21
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 7] Assemble a black angle corner with 2x M5x8 screws to each corners. Do not tighten them yet! |
|---|---|
| + | [* 5] For each corners, tighten alternatively the two M5x8 screws while applying pressure as shown on the images. |
| + | [* 10] The angled corners might warp a little the frame while tightened, we will solve this in the next step. Applying pressure while tightening reduce this. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added