Changes to Step #5

Edit by Dave Ogles —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Back and front extrusions
[* 9] Take your time with this step.
-[* 3] Repeat the previous step on the other plate.
-[* 6] Check that the newly added plate is correctly flushed with the extrusion.
- [* 9] This is important as other steps will depends on this assembly.
+[* 3] Repeat the instruction from Step 4, to align and attach the the joining plate at the other end of the extrusion..
+[* 6] Check that this plate is also flush with the face and end of the extrusion.
+ [* 9] This is an important step as other steps will rely on the accuracy of this assembly.