Changes to Step #2
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] How to tighten screws |
|---|---|
| + | [* 10] These are some information on how to tighten screws to avoid damage, ease alignment and ensure an homogeneous preload. |
| + | [* 9] If you have several screws to tighten together, always tighten them ***incrementally*** until they are snug. |
| + | [* 1] When you have 3 screws you can follow this tightening sequence: |
| + | [* 2] Start with the middle one |
| + | [* 7] Continue to the second one |
| + | [* 5] Tighten the third one and ***repeat*** until all screws are snug. |
Image 1
No previous image
Added