Changes to Step #2

Edit by Dave Ogles —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] How to tighten screws
-[* 10] These are some information on how to tighten screws to avoid damage, ease alignment and ensure an homogeneous preload.
+[* 10] Here are some tips on how to tighten screws; to avoid damage, to make alignment easier and to ensure consistently torqued screws.
[* 9] If you have several screws to tighten together, always tighten them ***incrementally*** until they are snug.
[* 1] When you have 3 screws you can follow this tightening sequence:
[* 2] Start with the middle one
[* 7] Continue to the second one
[* 5] Tighten the third one and ***repeat*** until all screws are snug.