Changes to Step #1
Edit by Alex Volkov —
Edit declined by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Left and right Z axis extrusions | |
| [* 1] Gather the following hardware: | |
| [* 3] 1x 290mm extrusion | |
| - | [* 7] |
| + | [* 7] 2x 359mm extrusions |
| [* 5] 2x joining plates | |
| [* 2] 2x M5x10 screws | |
| [* 6] 2x t-nuts. Slide them in one side of the 359mm extrusion as shown in the picture. | |
| [* 8] Attach the joining plate, using the 2x M5x10 screws, to the longest extrusion. Do not tighten them fully yet. |