Changes to Step #3
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [title] Left and right Z axis extrusions |
|---|---|
| [* 1] Prepare the following parts: | |
| [* 3] 1x 290mm (same extrusion as previously). | |
| [* 7] 1x 359mm. | |
| [* 5] 1x joining plates (in addition to the extra one left after the previous step). | |
| [* 2] 2x M5x10 screws. | |
| [* 6] 2x t-nuts. Slide them in a side of the 359mm extrusion as shown on the picture. | |
| [* 8] Repeat the previous step to build a 2nd mirrored extrusion + plate assembly. | |
| [* 9] Verify that both assemblies are mirrored and the extrusions have the same size (359mm). |