Changes to Step #5

Edit by Dave Ogles —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Top Z axis extrusion
-[* 7] Place the ''build_helper_z'' as shown on 1st and 2nd images.
-[* 5] With the help of a joining plate, press the plates against the extrusion and your table and tighten the M5 screws strongly.
+[* 7] Place the ''build_helper_z'' as shown in 1st and 2nd images.
+[* 5] With the help of a joining plate, hold the plates against the extrusion and your table and fully tighten the M5 screws.