Changes to Step #7

Edit by Grégoire Saunier —

Edit approved by Grégoire Saunier

Before
After
Unchanged

Step Lines

[title] Z axis extrusions assembly
[* 1] Prepare the following parts:
[* 7] 1x 359mm extrusion + plate assembly
[* 3] 1x 290mm extrusion + plates assembly
[* 5] 3x M5x10 screws
- [* 6] 3 t-nuts. Slide them in one side of the 359mm extrusion as shown in the picture.
+ [* 6] 3x t-nuts. Slide them in one side of the 359mm extrusion as shown in the picture.
[* 7] Attach both assemblies together with 3x M5x10 screws. Do not tighten them fully yet.
[* 2] With the help of a square, make sure you have a 90° angle and fully tighten the 3x M5x10 screws.
[* 9] Make sure the plates and extrusions are oriented as shown in the picture!