Changes to Step #2
Edit by Alex Volkov —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [title] Prepare Y idler mount | |
| [* 5] Take the "y_idler_mount" | |
| - | [* 7] Place 1x locknut in the pocket at the back of the part, as shown. Ensure sure the locknut has been fully inserted (use an Allen key or screwdriver) and is correctly oriented. |
| + | [* 7] Place 1x M3 locknut in the pocket at the back of the part, as shown. Ensure sure the locknut has been fully inserted (use an Allen key or screwdriver) and is correctly oriented. |
| [* 2] Thread 1x M3x25 screw through the front top hole and into the locknut. This will prevent you losing the locknut during the next steps. |