Changes to Step #3
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| [* 5] Slide 1x t-nut in the lower of the front extrusion | |
| [* 7] Using 3x M5x10, assemble the ''y_idler_mount''. Make sure to tighten the screw ***incrementally***. The exact position will be set later. | |
| + | [* 9] Always tighten the ''y_idler_mount'' ***incrementally***. This ensure the motor is getting squared correctly. |