Changes to Step #28
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| - | [title] Y motor installation |
|---|---|
| + | [title] Y motor installation - MK3(S) |
| [* 2] Place the Y motor on the ''y_motor_mount'' as shown on the first image. The cables must be orientated downward. | |
| [* 5] Secure the motor with 3x M3x18 screws. Do not tighten it strongly yet. | |
| [* 7] Finish to tighten the M3x18 screws while applying gentle pressure in the direction shown. | |
| [* 9] Verify the orientation of the motor cables. |