Changes to Step #15
Edit by Grégoire Saunier —
Edit approved by Grégoire Saunier
- Before
- After
- Unchanged
Step Lines
| + | [* 5] Locate the marker of the Y carriage. |
|---|---|
| + | [* 7] flip the carriage to have the marker facing the table (not visible from the top). |
| + | [* 2] Bearing holders have two dots printed on one of the face. Place the bearing holder with the dots oriented as shown on the image. |
| + | [* 6] Secure the bearing holders with 6x M3x25 screws. Do ***NOT*** tighten yet! |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added